How To Change Wifi Name For Yi Camera

Terminal fourth dimension we showed you how to hack the cheap petty (and beautiful) Wyze Cam v2 with a Micro SD Carte, some time and freely available software from GitHub. This time we hack the Yi Outdoor Security Camera with Yi Hack v4.

Now nosotros are back again showing you how to hack the super cheap Yi Outdoor Security Photographic camera. This device is nether $50, has night vision, and when you pair it upward with Yi-Hack v4 you can add SSH, FTP, MQTT and even RTSP support (RTSP for a modest donation to the software project). Best of all, you can enable privacy manner and keep the camera from phoning home to the Yi servers in China.

Stop letting your devices talk to their servers!

You're buying security cameras, stop sending the data dorsum to their servers. Sure, they give you an app, they want to sell you lot video recording services, but would they dorsum you up in courtroom if you needed them to? And Why bother paying them when you can employ software like MotionEye or Zoneminder to capture events and record yourself? Use the open source software people have put time into, take control of your destiny. To do and then, you have to utilize the hack to the Yi Outdoor security camera. Thankfully, it's really easy to exercise.

Hacking the Yi Camera – What you'll need

• YI Outdoor Security Photographic camera, 1080P 2.4G Wireless IP Waterproof Nighttime Vision
• Micro SD Card – 32 GB – While the documentation suggested a 16 GB or less card, I used this verbal card with success. Plus I had a two-pack laying around (and honestly, when finding the link I grabbed another because the stock was running low).
• #1 Philips Screwdriver – The one you lot use to fissure open up your PC is too big, you need a smaller one!

Hacking the Yi Camera

How to hack the Yi Outdoor Security Camera

As in the last hack yous'll need to format the SD Card with a FAT32 partition. Once again, I used my Linux desktop for this since I have a on-board SD Card reader that's pretty fast. Since nigh cards come pre-formatted I just fired upward GParted to double check the file arrangement type.

We're in luck, the SD Card is already formatted for FAT32

If you were using Windows 10, you lot're in luck, Windows will either offer to format the carte du jour or you can correct click on it in This PC and format it. Just be sure, of course, to select FAT32.

Obtain the hacked firmware files

Jump on over to the GitHub releases folio for the Yi-Hack v4 site and grab the terminal release for the photographic camera. There are others available, so be sure yous're grabbing the right ane.

Make sure for the Yi Cam Outdoor 1080p you're grabbing the file marked outdoor. The file names may be different if there is a newer release, for this nosotros're using version 0.2.0

Once y'all accept the zip file you but need to extract the files to the root of your fresh and empty SD Menu.

For me information technology was as like shooting fish in a barrel as dragging and dropping the files from the zip into the root of the SD Carte du jour.

Once y'all have the files on the SD Bill of fare, y'all'll demand to open a tiny door on the lesser, with tiny screws, to admission the SD Card slot on the photographic camera. This is where our trusty #ane Philips screwdriver comes into play.

The tiny door with the tiny screws, the requires the tiny screwdriver and takes the tiny SD Carte is easy to get off.

Inserting the SD Bill of fare into the Yi Camera Outdoor

At present, this is maybe the only hard part of the unabridged process. Information technology took me virtually a minute of fiddling to ensure I had the SD Card in all the manner. Rest assured, it's not hard at all. I merely didn't want to take to make two attempts so I made certain to button the card in all the mode. Information technology does have a push-to-snap-back mechanism, and don't worry, as long as y'all have information technology in the slot, you lot're okay. The slot however is pocket-sized and you lot'll want to take a shut expect before inserting.

This affair was a stupid little guy to go in, only it wasn't besides hard – merely be sure to push all the way or not put the door back on until you lot test it.

Finishing up the hack

You're ready, power up the camera and go to the webpage for information technology. At this point you'll be able to manage the settings and exercise what you demand. Crypt0, the projection lead, makes it really easy by setting the hostname for the photographic camera to http://yi-hack-v4/. This works in most homes, merely if yous're router won't find the hostname, you'll accept to get on the router and find the IP accost and manually connect.

The first thing I did when I setup the photographic camera is have it end calling back to Cathay. I'thousand going to make the donation for RTSP support then I don't need the app and I never intended to utilize it when I bought the thing.

Setting the privacy restrictions for the Yi Cam

You'll run into above I am updating the hostname of the device, I'grand going to install a second one after running through the hack again, on the back door. I desire to exist sure they have unique host names and I wanted to make them more familiar. Of course besides, I've turned private style on past disabling the deject support and am going to test the "Recording without Cloud" function. Since I'yard going to piping it into MotionEye, it'due south actually just an experiment.

Of form, if I wanted to utilise the Yi App, alter Wifi, etc, I can re-enable the characteristic.

Yi Photographic camera Advanced Features

By default the FTP server isn't enabled and neither is the NTPD server (to sync the time with the diminutive clock servers worldwide, we'll presume this matter doesn't take a RTC chip). If you scroll downwardly you lot can enable (or disable) these too.

Enable MQTT

Since I'm running Dwelling house Banana at habitation, Node Red and Mosquitto, I'm going to also turn on the MQTT support and feed motion events into those systems (Mosquitto -> Node Blood-red -> Home Assistant most likely). Turning it on with Yi Hacks v4 is actually amazingly simple.

Omitted from the screenshot to a higher place is the section for security. You tin can easily set the username and password for your MQTT server in one savage swoop. Be sure if you're running more one camera to update the Client ID then they are unique to your MQTT server.

MQTT testing – Using MQTTBox from the Windows Store I tin can see the messages when in that location is movement on the photographic camera.

RTSP Back up on Yi Hacks v4

The good and bad news

The expert news is – Yi Hacks supports RTSP output. You can pick up the camera from apps similar VLC, MotionEye, Zoneminder, Abode Assistant, et. al. The bad news, you lot'll have to donate a few British Pounds to do so. The good news, it's going right to the GitHub projection maintainer, so don't experience besides bad about beingness held bribe.

Obtaining the key just takes a few steps and some time for Crypt0 to email you a license central. You'll have to hop into the Discord server for the hack (where yous tin can too become some support) and request a donation. From there y'all'll exist sent to the site to tie your camera to the RTSP software and you'll exist adept to go.

Terminal thoughts

Overall, the hack is easy, the camera is inexpensive – one of the easiest. At the same time, it wasn't made abundantly clear upfront that I'd accept to drop a few more bones to get the RTSP license cardinal. But I feel good about supporting a projection and hope that ways some of the 101 open up issues currently start getting closed.

Don't look, it's a dandy photographic camera, go grab one today.

Source: https://kindalame.com/2020/01/05/how-to-hack-a-yi-outdoor-security-camera-1080p-with-yi-hack-v4/

Posted by: mooreoffing.blogspot.com

Share this post